Inserts c/w Adaptor Sleeve GSH20 - GSH35RRB

GSHRRB Radial insert ball bearing c/w adaptor sleeve. The inner ring is located on the shaft by means of an adapter sleeve with a locknut and a tab washer. This location method is suitable for bearing arrangements with a constant or alternating direction of rotation and for high speeds. The adapter sleeve and locknut give concentric, force locking location of the bearing inner ring on the shaft. As a result, the speeds that can be achieved are approximately the same as with deep groove ball bearings. These bearings also give quieter running than normal radial insert ball bearings. The adapter sleeve, locknut and tab washer are all zinc plated. The bearings are highly suitable for reversing operation. As a result of the force locking connection, there is no occurrence of fretting corrosion between the shaft and the bore of the adapter sleeve. Due to the integral adapter sleeve, the bearings have the same radial dimensions as and slightly lower basic load ratings than radial insert ball bearings with an eccentric locking collar or with grub screws in the inner ring and are interchangeable with these bearings.