RHP Belt Tensioner Unit BT5 Casting 1035 for 30mm shaft

Stock Code: BT30L

2 In Stock
Want more than what's in Stock? Please call us on 01482 329553 or email us on sales@georgelodge.co.uk

Descriptions

RHP Self-lube Cast Iron Conveyor Belt Tensioner Units. BT5 will be marked on the casting, 1035-30G on the bearing.

The shaft locking arrangement is a set screw lock. This locking arrangement consists of two knurled cup-point, self locking, socket-head set screws fitted in the extended inner ring.

Lubrication - Self-lube bearings are factory charged with the correct amount of grease and do not require a further grease charge when fitted. Re-lubrication is not normally necessary except when operating at extremes of temperature, speed, loading, extended running or where excessive wet or diry conditions exist. The housings are provided with a tapped hole to facilitate relubrication and supplied with a grease nipple. All units are tapped 1/4" UNF. Note; a grease adapter (ref 1003G) which are available on our website to fit the 1/4" UNF tapped hole to give 1/8" BSP female fitting.

Please see download below to open up the RHP catalogue for further dimensions.